Passeport Élite 100% Solid Epoxy Passeport Élite 100% Solid Epoxy is a solvent-less, self-leveling, two-component epoxy coating system. It exhibits very good appearance and chemical and physical properties. It was developed for systems that require a low viscosity epoxy coating for easier application. ADVANTAGES - Dense surface resistant to bacteria and moisture and easy to clean. - Contains no solvent with a very low VOC content, allowing for interior application without harmful odour. - Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate. - May apply several layers on itself with excellent adhesion.
APPLICATION Pour the product directly onto the floor in consecutive and parallel strips. Using a brush, quickly cut in the edges. Then, using a squeegee, spread the product and back roll (left to right, then toward you). It is important to get a uniform coating and avoid puddling. RECOMMENDATIONS - Do not touch up the product after 10 minutes. - Wear spiked shoes to walk on the coated surface. - Apply a coat of clear epoxy on dark or metallic colours. - Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems. On vertical or sloped surfaces, apply THIN COATS of the product to prevent sagging.