Passeport Élite Industrial Polyaspartic – 98,5% Solids Passeport Élite Industrial Polyaspartic is a two-component 80% solid polyaspartic coating system designed to restore and protect floors such as concrete, wood, metal etc. It has excellent, UV stability, physical and chemical resistance as well as aesthetic appearance. APPLICATION - Marine protection for steel, fiberglass, concrete, wood etc. - Aircraft hangar floors - Maintenance facilities - Industrial floors - Car washes - Bridges ADVANTAGES - Low odour - UV stable - Good chemical resistance - Good chemical and physical resistance - Easy to clean, bacteria and moisture resistant surface
MIXING Passeport Élite Industrial Polyaspartic must be conditioned at temperatures between 18°C/64.4°F and 30°C/86°F. It is packaged in factory proportioned quantities for easy handling and mixing. Measure one part of resin and one part of hardener. Mix for 3 minutes. Make sure to scrape walls and bottom of container with straight edged trowel at least once to ensure homogeneous mix. APPLICATION Passeport Élite Industrial Polyaspartic should be applied at ambient and surface temperatures between 15-28°C and humidity below 80%. Passeport Élite Industrial Polyaspartic must be applied with a rubber squeegee and back rolled to remove squeegee lines and smooth out. coating. Additional coats may be applied when surface is tack-free (roughly 8 hours).