Passeport Élite Industrial Epoxy-Based Crack Filler Passeport Élite Industrial Epoxy-Based Crack Filler is a two-component 100% solid epoxy paste designed to repair vertical and horizontal cracks. It has excellent adhesion with different types of surfaces such as concrete, masonry, wood, metal and plastics. Fast cure : +/- 4 hours. APPLICATIONS - Assembly area - Classrooms - Public and commercial buildings - Laboratories - Mechanical rooms - Health care facilities - Car dealerships ADVANTAGES - Low odour, Solvent-free - 100% solids - Seamless - Good physical resistance - Easy to clean, bacteria and moisture resistant surface
MIXING Passeport Élite Industrial Epoxy-Based Crack Filler is supplied in factory proportioned quantities, greatly reducing the risk of applicator error during mixing. Measure 2 parts of component A and 1 part of component B. Mix for 2 to 3 minutes until uniform consistency is achieved. Make sure to scrape walls and bottom of container with straight edged trowel at least once to ensure homogeneous mix. Make sure to empty ALL contents of PART B into PART A to avoid system weakening or incomplete curing. DO NOT MIX MORE MATERIAL THAN CAN BE APPLIED WITHIN WORKING TIME LIMITS. APPLICATION Passeport Élite Industrial Epoxy-Based Crack Filler should be applied at ambient and surface temperatures between 15-28°C and humidity below 80%. Passeport Élite Industrial Epoxy-Based Crack Filler is applied with a rubber squeegee and back rolled to remove squeegee lines and smooth out coating. Additional coats may be applied when surface is tack-free (roughly 8 hours). Do not exceed first 24 post-application hours for recoating. By exceeding this recoat time limit, the entire surface must be lightly sanded to achieve desired profile for a proper mechanical bond. Clean up all dust and debris created by aforementioned sanding prior to applying subsequent coat.