The Paint and Varnish Buster Surf-Pro The Paint and Varnish Buster Surf-Pro based on methylene chloride with granules to detect the different coatings installed on furniture, metal, wood, concrete over the years. Conventional paint strippers, despite their excellent quality, can only provide maximum performance on coatings where an oil-based paint or varnish has been applied. With a process exclusive to Surf-Pro to incorporate in this gel solvents hitherto incompatible, give maximum performance in a short time and inconvenience. THE PAINT and VARNISH BUSTER is used both indoors and outdoors. On vertical surfaces freezing for about 30 to 45 minutes will allow it to not flow. Applies safely on antiques (furniture), wood, metal (automobile bodywork), painted or tar-stained brick and some plastics (rigorous obligation to make a test before).
Practically odorless in action (very slow evaporation rate) Easily detects and removes these coatings: oil paints, oil paints and lattices, latex and 100% acrylic, solid lacquers, polymer compounds, leadbased paints and dyes, roxotones, paint-based epoxy and urethane, melamine finished paints, crystallized finishes, etc. Can simultaneously remove 3 to 5 different types of coating in a single application. Safe application indoors as long as the room is well ventilated. Neutralisation: Because THE PAINT and VARNISH BUSTER evaporates very slowly, it must be neutralized with methyl hydrate (wood alcohol). THE PAINT and VARNISH BUSTER recognizes that solvent which has the effect of stopping its action on the field. In addition, methyl hydrate evaporates to 99% leaving no residual. This will be useful when it comes time to cover the furniture pickled in this case with a dye.